
Walk it in 3D
Move through every floor in the browser, on any device, with nothing to install.
A measurable 3D record of the building, its equipment pinned with close-ups, every capture dated and compared, and FrontView AI to answer questions about all of it.
Every record starts with a FrontView Capture. See how it works

Each capture becomes a measurable 3D model of the building and a floor plan of every floor, filed under its address in your account.

Move through every floor in the browser, on any device, with nothing to install.
Walls, doors, ceiling heights and clearances, measured from your desk.
Every floor, with room sizes, doors, windows and columns, to download as PDF or DXF.
By link, on social, embedded on your site, or behind a password, and invite your team. You set it for each capture.
At the electrical panel, the boiler or the rooftop unit, the technician adds a point and takes close-ups. Each point is pinned where it sits, with nameplate and condition photos, and checked again at every capture.


Download the source files and the structured data from every capture, whenever you want them. Nothing is locked inside the FrontView viewer.
Each record lives in the account it was captured for. Nobody else can find it, look it up or see that it exists. You decide who sees it and for how long.
A single scan shows a building on one day. A FrontView record keeps every capture of the same building, dated and measurable. 123 Main Street was captured for the listing, again at lease end, and again when the fit-out was done.

Move-in and move-out on the same record, compared wall by wall.

Existing conditions, work in progress and the finished space.

A leak or damage, compared against the last capture.

Every point of interest is checked again, so you see when the boiler or a rooftop unit was replaced, and what the nameplate says now.

Every six months or every year, and at lease start and end, fit-outs and incidents. The record shows how the building ages.

The envelope, dated and compared: cornices, setbacks, drains and rooftop units.
Set a recapture schedule for each building, and the events that call for one. When it's due, a reminder goes out, and you request the visit in one step.
Given a building’s record, FrontView AI can generate a full inspection report: every space, the facade and roof, and every point of interest, with what looks wrong and where, for you to review.
Not a professional inspection, and not an official record. Don’t file an AI Building Inspection as an official inspection record, and don’t rely on it as a property, building or engineering inspection. For a purchase, a loan, insurance or safety, use a licensed inspector or engineer.

A continuous crack runs up the inside corner, through the bricks and the mortar, for most of the wall’s height.
Suggested: Have a structural engineer assess it.
FrontView AI works from your building’s own measurable record: its walls, doors and dimensions, the equipment pinned in it, and each capture since the first. Ask it in plain English.
Ask the floor plan in plain English: how many desks fit, what if the conference room goes.
Rearrange the layout by asking in plain English, then compare it with the space as captured.
Walls, equipment and visible condition, compared between any two captures.
Start the record with one capture. Every capture after that makes it worth more.
